Product Service
Alkali-and salt-resistant paint
+
  • Alkali-and salt-resistant paint

Alkali-and salt-resistant paint


Classification:

Product Introduction

Josme alkali-and salt-resistant paint is a polymer modified three component waterproof slurry. The active chemical substances contained in the slurry penetrate into the concrete through the carrier water, forming insoluble crystals in the concrete, blocking the capillary channels, and enhancing the anti-permeability and waterproof effect of the wall.

Product Details


Product Introduction:

Josme alkali-and salt-resistant paint is a polymer modified three component waterproof slurry. The active chemical substances contained in the slurry penetrate into the concrete through the carrier water, forming insoluble crystals in the concrete, blocking the capillary channels, and enhancing the anti-permeability and waterproof effect of the wall.

 

Packing specification:

18.5kg

 

Scope of application:

Seasonal rain wall, kitchen and bathroom back water surface, basement side wall, low-rise buildings 1 meter below the location of the wall prone to flooding, nitrate.

 

Performance characteristics:

L anti-pantothenic, anti-salt nitrate.

L back water impermeability and waterproof.

L water-based environmental protection, does not affect the construction of latex paint.

 

Construction process

L common base surface: the base surface should be smooth, solid and clean, and the alkali-resistant interface agent should be applied.

L pan-alkali mildew base surface treatment: eradicate pan-alkali mildew base to solid layer-brush with steel wire to remove residual floating dust-clean base layer-jasme plug leakage king to repair holes-apply anti-alkali interface agent for 1-3 hours (according to actual weather temperature, completely dry shall prevail)-apply anti-alkali and anti-salt waterproof slurry

L according to the product label ratio, first pour the liquid material into the mixing barrel, slowly add the powder, and at the same time, fully stir with an electric stirrer until even without agglomeration, and stir again for no less than 30 seconds after standing for 3-5 minutes.

L use brown brush or roller to evenly brush the stirred slurry on the base surface according to the "cross" method. The coating film should be brushed two to three times. When the water seepage is serious, it is recommended to brush three times.

L each brushing gap is about 1~3 hours, and the next construction can be done without sticking. The thickness of each construction should not exceed 1mm to prevent cracking caused by thick coating. The coating shall be uniform in thickness, and any brush leakage, damage and exposed bottom shall be repaired in time.

 

Reference Dosage:

Theoretical dosage of anti-alkali interface agent: 0.1~0.15kg/ ㎡

Theoretical dosage of alkali-resistant and salt-resistant waterproof slurry: 1.8~2.0kg/ ㎡

Key words:

Alkali-and salt-resistant paint

Related Downloads


Message

JOSME Building Materials Technology Co., Ltd.

Home    |   About Us    |   Products    |   Case    |    Join Us    |   News   |   Contact Us


Address: 169 Bayi West Road, High-tech Industrial Development Zone, Shangqiu City, Henan Province

Telephone:+86-400-6070-217

 

Copyright ©JOSME Building Materials Technology Co., Ltd.  Business License

Powered by www.300.cn  Supports IPV6   SEO

WeChat

WeChat

Copyright ©JOSME Building Materials Technology Co., Ltd.

Business License  Powered by www.300.cn

Supports IPV6   SEO

Two-dimensional code

Sweep the code and enter the beautiful sewing assistant to get more beautiful sewing colors.