Product Service
Water-based floor paint
+
  • Water-based floor paint

Water-based floor paint


Classification:

Product Introduction

Water-based floor paint not only maintains the excellent physical and chemical properties of the oily floor, but also has the characteristics of safety, energy saving, film permeability, participation in cement hydration and so on. Water-based floor paint has good adhesion to most of the substrate, in the wet substrate surface also has good adhesion, with high hardness, good wear resistance, acid and alkali resistance and other properties, while strong decorative, small odor, no pollution, to meet the current environmental requirements.

Product Details


Product Introduction:

Water-based floor paint not only maintains the excellent physical and chemical properties of the oily floor, but also has the characteristics of safety, energy saving, film permeability, participation in cement hydration and so on. Water-based floor paint has good adhesion to most of the substrate, in the wet substrate surface also has good adhesion, with high hardness, good wear resistance, acid and alkali resistance and other properties, while strong decorative, small odor, no pollution, to meet the current environmental requirements.

 

Performance characteristics:

Good weather resistance (polyurethane), long service life.

Strong adhesion, high hardness, good wear resistance.

● Excellent water resistance, acid and alkali resistance.

● Decorative, small smell, no pollution.

 

Scope of application:

All kinds of workshops, warehouses, underground garages and other requirements of clean ground, corridors, stairs, shopping malls, driveways and other wear-resistant occasions, including waterborne polyurethane floor paint can also be used in outdoor places.

 

Construction process:

● Environment: The humidity of the construction environment is less than 85%, the temperature is between 10-40 ℃, the ideal temperature is between 15-35 ℃, and good ventilation is maintained.

● Base surface: the base surface is kept dry, polished to remove impurities such as floating and sinking, oil, and the base surface reaches a certain flatness and roughness.

The specific construction technology and component ratio, see the product construction scheme.

 

Safety Precautions:

● Component A and component B must be fully mixed and stirred evenly, otherwise it will seriously affect the performance of the material. After component A and component B are fully stirred evenly, a small amount of water can be added and stirred evenly again.

● After mixing component A and component B, it should be used up within 1 hour.

●Ingredients must be weighed with an electronic scale.

The whole construction process and drying process must be carried out in the environment above 10 ℃, and the temperature is too low to be suitable for construction.

● If the topcoat is applied by roller coating, a short wool roller for floor paint should be used. After opening the barrel, the two components should be stirred first, and each stirring should not be less than 5 minutes.

● Each coating shall be carried out after the coating is completely dried and cured. If the coating interval is too long, dust removal shall be polished first.

Key words:

Water-based floor paint

Related Downloads


Message

JOSME Building Materials Technology Co., Ltd.

Home    |   About Us    |   Products    |   Case    |    Join Us    |   News   |   Contact Us


Address: 169 Bayi West Road, High-tech Industrial Development Zone, Shangqiu City, Henan Province

Telephone:+86-400-6070-217

 

Copyright ©JOSME Building Materials Technology Co., Ltd.  Business License

Powered by www.300.cn  Supports IPV6   SEO

WeChat

WeChat

Copyright ©JOSME Building Materials Technology Co., Ltd.

Business License  Powered by www.300.cn

Supports IPV6   SEO

Two-dimensional code

Sweep the code and enter the beautiful sewing assistant to get more beautiful sewing colors.